Fairchild Haul-Mark 30-Inch Continuous Haulage System


Recommended seam height: 30" - 40"

Fairchild Radio Remote Control Detached 30" Haul-Mark Continuous Haulage System with 480 or 950 volt AC, 60 Hertz. The haulage system will be fitted with multiple-unit electrical controls, tape switch type emergency stops.

Haul-Mark Advantages:

  • 10 to 12 ton per minute capacity
  • 180 degree articulating crawlers offer unparalleled flexibility
  • Operates in true 90 degree cross cuts
  • 15 psi ground pressure allows operation in extremem soft floor conditions
  • Mobility for sloping seam conditions
  • 26 and 32 inch stacked heights available for low and medium seam heights
  • Narrow design reduces tramming time, allowing increased productivity

Fairchild 36 or 42-Inch Belt Width Rapid-Haul Rigid Rail System

Centers
50' x 60 ' on 60° or 90° Angles for 5 entries or
37.5 x 50' on 60° or 90° Angles for 7 entries

Detached Miner Bridge
Overall Length 36 ft., 6 in. [11.1 m]
Width (at operator's controls) 67 ft., 9 in. [1.7 m]
Stacked Height (at secondary bridge) 26 in. [660 mm]
Crawler Specifications
Ground Bearing Pressure 15 psi
Crawler Articulation 90° (on each side)
Conveyor Specifications
Capacity 10 - 12 tpm
Conveyor Width 30 in.
 Scoops-Shield Haulers
 Maintenance Vehicles
 Haulage Systems

Haulage Systems

By conducting extensive research and working closely with customers, Fairchild engineers have developed superior remote-control haulage systems. With reliability, maneuverability and narrow chassis widths, conveyor widths ranging from 24 to 36 inches and articulating crawlers that offer maximum flexibility, our models have set the industry standard.

 Continuous Miners


At Fairchild, we design and manufacture the most advanced continuous miners, haulage systems, shield haulers/scoops and maintenance vehicles you'll find anywhere.