Model 35C-WHL Workhorse Low Scoop

Recommended Seam Height: 42'' – 60''

• 120 or 130 Cubic Feet Capacity Center Eject Bucket
• Heavy Duty Steel Frame, 22 Inches High except at Center Section area which is 25 Inches with a One Year Warranty
• Ball Bearing Center Section with a Three Year or 12,000 Hour Warranty on Center Section Bearing
• Expanded and Extended Operator’s Deck
• Operator’s Compartment Door and Latch Assembly
• Adjustable Canopy with Back Protection
• Ground Based Battery Changing System with Two (2) Trays
• John Deere 1200 Series Inboard Planetary Axles with Wet Disc Service Brakes with a One Year Warranty
• Hydraulic Operated Differential, 4 x 4 Positive Traction Lock
• 32 X 14.5-15 Tires or 35 X 15-15 Tires
• Four (4) Tow Hooks
• Battery Bumper and Lid Protector
• Heavy Duty Adjustable Seat
• 7-3/4 – 10-3/4 Inch Ground Clearance with 32 Inch Tires
• 8-3/4 – 11-3/4 Inch Ground Clearance with 35 Inch Tires
• IGBT Controller
• Diagnostic Readout Mounted In Operator’s Deck

• Handheld Data Programmer
• Remote Plug-In for Handheld Data Programmer
• Fuel Gage
• Quartz Halogen Lighting System
• Tape Switch
• 50 Horsepower Tram Motor and Gear Reducer
• 16 Horsepower Pump Motor with Two Stage 20/5 gpm Pump
• UVR Trip Circuit Breaker
• Breaker Reset System
• Guard on Controller
• Pressure Side Hydraulic Filter System
• MSHA Approved Automatic Emergency Wet Disc Park Brake System with Service Brake Assisted AEPB System
• Hydraulic Power Take Off
• Hydraulic Jet Fill System
• JIC Hose Fittings
• 5 Inch Bore Steering and 7 Inch Bore Bucket Lift Cylinders
• Four Point Fire Suppression System with Remote Actuators